Installation Guide

Greatmats.com
877-822-6622
[e-mail]
1
Max Tile Interlocking Modular Flooring Tiles
Installation
Materials Needed:
Box cutter or utility knife, spare blades, lubricant for blades (WD-40) table saw or jig saw
Allow all flooring materials to acclimate to the room for 24-48 hours
Installing snap together floor tiles is a simple procedure that almost anyone can do. Follow these
simple instructions to lay your new flooring like a professional. Since no adhesives are required, this
installation should be relatively quick and easy. For wall-to-wall installations of snap together flooring,
you may discover that you need to cut your tiles to fit. If you find that to be the case, we recommend
that you use a table saw. We also suggest that you keep a lubricating spray oil on hand to use
on
your blade. This will keep it from getting hot and melting the plastic tray of your tiles. You will want to
be sure to spray directly on the blade and not on the tiles.
Step 1 The panels have 2 sides with female loops, and 2 sides with male pegs:
Step 2 Start by laying your first panel in any corner (male edges required) or garage opening (female
edges required) roughly 1″ from the wall. The loops should be pointed in the direction you
want to add panels: