User manual Escapade MX 30-35cc 80

❏

26. Install the throttle pushrod using the same procedure

as used on choke pushrod. We recommend that a throttle

cutoff also be set up on the transmitter to close the throttle

completely, stopping the engine.

Assemble the Fuel Tank

❏

1. Clean both ends of the brass tubes with sandpaper.

❏

2. Solder fuel line barbs onto one end of the brass tubes.

❏

3. Insert the brass tubes in the fuel tank stopper and

stopper plates.

❏

4. Solder the barbs on the other end of the two shorter

brass tubes.

❏

5. Bend the vent tube.

❏

6. Install the two fuel pickup lines and clunks so they

move freely.