User's Manual

44
Remote Operation through Tone Telephone
You can use many system features when you are away from home. To protect
your privacy, most features can be used only after you enter the three-digit
Remote Access Code.
Remote Access Codes
The Remote Access Codes are preset at factory as shown below. You can use
the preset codes or choose your own.
Primary Mailbox : 999
Mailbox 1 : 555
Mailbox 2 : 666
Mailbox 3 : 777
Mailbox 4 : 888
NOTE: If AC power fails and you have no backup battery installed or the
backup battery is in low power, the Remote Access Codes return
to factory preset codes.
Changing of Remote Access Codes
All digits of Remote Access Codes are the combination of numbers 5, 6, 7, 8, 9, 0.
IMPORTANT: Digits 1, 2, 3, and 4 cannot be used when changing access
codes for any mailbox (including primary).
1. Press a mailbox button for mailbox 1, 2, 3, 4. For primary mailbox, follow
steps 2 to 6.
2. Press and hold down the CODE button until you hear the announcement
"Please enter the code number."
3. Press and hold down the DAY button. Release the button when you
hear the desired first digit of the code.
4. Press and hold down the HOUR button. Release the button when you
hear the desired second digit of the code.
5. Press and hold down the MINUTE button. Release the button when you
hear the desired third digit of the code.
6. Press the CODE button, the 3-digits you have selected will be announced.
Answering System Operation