Manualshelf

User's Manual

ManualsBrandsGreatsino Electronic ManualsElectronics900MHz Analog Modulation 40 Channels Cordless Phon
11121314151617181920
12
Wall Mounting
You may choose to put the BASE UNIT of your cordless telephone on a wall.
1. With the back of the BASE UNIT facing up, connect the SHORT TELEPHONE
LINE CORD to the telephone line jack.
2. Insert the top hooks of the MOUNTING BRACKET into the matching slots of the
BASE UNIT (as shown below). Then push the bottom hooks of the MOUNTING
BRACKET into place. Plug the free end of the SHORT TELEPHONE LINE CORD
into the MODULAR WALL JACK.
3. Align the upper keyhole on the MOUNTING BRACKET with the upper STUD of the
wall plate, so that the opening end of the MOUNTING BRACKET matches the lower
stud, then pull the BASE UNIT down until securely seated.
Wall Mounting
WALL PLATE
STUD
WALL
PLATE
BASE UNIT
TELEPHONE
LINE JACK
SHORT TELEPHONE
LINE CORD
MOUNTING
BRACKET