User's Manual

16
MEMO
MEMO
MEMO
key 1 on the keypad.
Storing Numbers
1. Be sure the BASE UNIT IN USE indicator is off and the HANDSET
is in STANDBY mode (See special features section).
2. Press the button.
3. Dial the number you want to store.
4. Press the button again.
5. Dial the index number (0-9) where you want to store that number.
You will hear one confirmation beep.
6. Write the name of the person you will be calling with that number next to the
corresponding index number on the telephone number label.
7. Repeat steps 1 through 6 for other telephone numbers.
EXAMPLE: To store the number 555-1212 under the index number 1 on the
keypad:
1 - Press the button. 4 - Press 1 on the keypad.
2 - Dial 555-1212. 5 - You have stored 555-1212 under
3 - Press the button again.
A total of 10 telephone numbers can be programmed in memory.
IMPORTANT: The maximum number of digits that can be stored for any phone
number is 16 in PULSE or TONE mode. The maximum number of digits for mixed
(Tone and Pulse in combination) dialing is 15. If you are using a switchboard system to
access an outside line (such as an 8 or 9), press the PAUSE button to store a
pause.
Storing Numbers
MEMO