User's Manual

IMPORTANT

When you hear interference,

press the CH button to change

the operating channel.

Excess static, check the following:

1. Check to see that the ANTENNA is not touching another metal object.

Raise the ANTENNA.

If after pressing the TALK button, you receive three beeps and no dial tone,

check the following:

1. If you had a power failure or had unplugged the BASE UNIT, replace the

HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system.

NOTE: If no telephones in the house

are working, disconnect one set at a time to

verify that none of the phones are causing the

problem. If you still have a problem after doing

this and your telephone still does not work,

please contact your local phone company.

Problem Solving