User's Manual

Connecting Your Phone

This section is a reference guide in connecting your cordless telephone for

proper operation.

1. Carefully remove your cordless telephone from its shipping carton. If

there is any visible damage, do not attempt to operate this equipment.

Return it to the place of purchase.

2. Check to be sure you have all items that come with this cordless telephone

system. You should have a HANDSET, BASE UNIT, AC ADAPTOR,

TELEPHONE LINE CORD, SHORT TELEPHONE LINE CORD, WALL

MOUNT BRACKET and OWNER'S MANUAL.

3. Install batteries which will be used as backup power for time stamp feature to

function in case of power failure.

A.Unscrew and open the Battery Cover

located on the bottom of the BASE UNIT.

B.Place 4 AAA size Batteries (1.5 volt) into the

compartment, paying attention to the polarity

shown in the compartment.

C.Close the Battery Cover and screw back.

4. Insert one plug of the telephone line cord into the house telephone jack and

the other end into the telephone line jack on the back of the BASE UNIT.

(If you have an older 4-prong telephone jack, you will need an RJ-11C

TELEPHONE JACK ADAPTOR. This adaptor is available at the same place

you purchased your telephone.)

AC ADAPTOR

TELEPHONE

LINE CORD

SHORT TELEPHONE

LINE CORD

HANDSET

Getting Started

WALL MOUNT

BRACKETBASE UNIT