Instructions / Assembly

3
Usage Precautions
If the power cable becomes damaged, stop
using the unit and have it serviced by a
qualified service technician. Do not pull, bend,
kink, tie or otherwise stress the power cable.
To avoid dangerous electrical shock or
damage to the unit, installation,
relocation or servicing must be
performed by a qualified service
technician.
Colder temperatures will cause a
decrease in the flow rate. This is
normal.
Failure to observe the following precautions could result in property damage or serious personal injury.
Do not store the unit in direct sunlight
or at less than 32 degrees Fahrenheit.
When the inlet water doesn't meet
the municipal tap water standard
(e.g. includes excessive sand or
mud or chlorine exceeds
standards), please install a
pretreatment device in front of this
product.
The recommended working pressure of
the unit is 14.5 - 58 psi. Please install a
pressure regulating device if water
pressure is above or below this range.
If the unit becomes damaged,
immediately shut off the power and
water supply, unplug the power cord and
contact a qualified service technician.
Avoid exposure to magnetic field.
Exposure to a strong magnetic
field could damage the unit or
result in fire.
Instructions on what must be
avoided
Instructions on what action must be
taken
Precautions to prevent device or property damage or injury