Use and Care Manual

14
OPERATION OF WIRELESS REMOTE CONTROLLER
X-FAN MODE
When operating in humid areas, the unit has a DRY COIL function
called X-Fan that will allow the indoor fan to run for a pre-determined
amount of time after the unit is turned off (cooling or dry modes)
to ensure that additional moisture is removed from coil. Push the
“X-FAN” button to enable this feature. The X-FAN icon will
be displayed on remote controller. To deactivate this feature, push
the “X-FAN” button again.
DISPLAYING SETPOINT ON FRONT PANEL
Only the setpoint temperature will be displayed on the front panel
and on the remote controller.
X-Fan Mode Display
Turbo Mode Display
TIMER SETTING
T-ON button (Timer ON)
To set when you want the unit to turn On at the end of a selected
time period, use the button labeled “T-ON” on the remote
controller. Press this button to make the clock icon disappear,
replaced with the word “ON” (blinking). Press “+” or“-” buttons
to adjust timer setting 1 minute
at a time. Press and hold “+”
or “-” button to set timer more quickly. Press“T-ON” button
again to confirm setting, and the word “ON” will stop blinking.
To cancel, press“T-ON” button again.
TURBO MODE
The desired room setpoint can be achieved faster in TURBO
mode. After selecting the“HEAT”or“COOL” mode button,
push the“TURBO”button. The TURBO icon will be
displayed on the remote controller and the unit will run at an
ultra-high speed. To deactivate the feature, push the“TURBO”
button again. The unit will return to normal operation.
Timer ON Display