Use and Care Manual

1716
OPERATION OF SMART CONTROL
FOR USE WITH YOUR SMART PHONE
For the ultimate in convenience, your Crown Heat Pump or Air Conditioner features a built-in
intelligent WiFi capability and Smart Control function. This allows you to operate the unit
through your smart phone. The system is compatible with devices using standard Android or
iOS operating systems, and you can connect as many as four separate smart phones. Refer
to application program for the specific version.
STEP 1. Download and install Gree-Smart App on your smart phone
METHOD 1: Go to www.gree.com/english/downloadcenter/ihome_jsp_catid_2840.shtml.
In the "Download Center,” follow instructions to download the
“G-Life” Application.
METHOD 2: Scan this QR code and download the application directly.
METHOD 3: Download the “G-Life” Application directly
from the Apple App Store (for iOS devices only). After successful
installation, the app icon will appear as shown at right:
NOTE: The appearance on your device may vary.
Please refer to actual application.
STEP 2. Turn on Indoor Wall Unit WiFi Interface
Using the remote controller, turn On the Crown System
(making sure the remote controller is matched). Press
and hold the“WiFi” button on the remote controller for
at least 5 seconds. WiFi icon will display when the
WiFi function is on.
STEP 3. Connect Crown System to your
smart phone/ tablet PC
Enter the WiFi setting of your phone and search
for the wireless network named gree-xxxxxxxx.
For example, gree-E9D1.
STEP 4. Enter password
Your default password is 12345 or 12345678.