ETAC Product Data Guide

ManualsBrandsGree ManualsAir ConditionersPTAC Air Conditioner Cooling Area,

EXPANDED RATING DATA

HEAT PUMP HEATING PERFORMANCE

37 42 47 52 57

BtuH 5250 5540 6300 6900 7620

Kw 509 518 540 549 580

Amps 2.3 2.4 2.4 2.5 2.6

BtuH 6005 6399 8100 8647 9245

Kw 647 656 720 725 735

Amps 3.3 3.3 3.4 3.4 3.5

BtuH 7726 8531 10700 11278 12234

Kw 883 917 1010 1039 1073

Amps 4 4.1 4.5 4.7 4.9

BtuH 10530 10850 13300 14550 15940

Kw 1197 1212 1300 1377 1439

Amps 5.3 5.4 5.8 6.1 6.3

Based on 70 Deg F Indoor Temperature

LEGEND

D.B. - Dry Bulb

AMP - Total current

Kw - Total Power

BtuH - Total Cooling Capacity

RH - Relative Humidity

15,000

OUTDOOR TEMP D.B (DEG F)

NORNIMAL BtuH

SIZE

7,000

9,000

12,000

APPLICATIONS

• Hotels and motels

• Nursing homes and assisted living care

centers

• Offices

• Apartments

• Single--family dwellings

• Home conversions and residential add--ons

NEW CONSTRUCTION

ADVANTAGES FOR NEW

CONSTRUCTION

Design Flexibility for the Architect/Engineer

• Whisper--quiet performance, indoors and out

• No bulky duct system

• No separate equipment room

• No water towers or additional cooling

equipment

• No complex match--up of different HVAC

components

• Less sensitivity to building orientation (sun,

wind, shade)

• Optional architectural grille to permit custom

exterior appearance

I nitial Cost Savings for the Buildin

g Owner

• No expe

nsive component HVAC system

purchase

• No equipment room or maintenance

engineering staff

• Two--part delivery to minimize on--site

damage

• Weather--protected wall sleeve that goes in

place during construction; chassis that slides

in place after construction

• No seasonal changeover required for cooling

or heating -- units are self--contained comfort

systems

Lower Operating Costs and Reliable Comfort

for The Occupant

• Heat pump models offer substantial savings

over models with conventional electric

resistance heaters

• Individual units allow tenants to choose the

degree of comfort and operating economy.

• Rapid servic

ing reduces downtime: complete

chassis can be replaced in minutes without

disrupting other occupants.

• Each unit operates independently of other

units in the building. No dependency by

building on central HVAC system.

RETROFIT/REPLACEMENT

If you are replacing a unit in an existing wall sleeve,

your options include:

• Replace the existing wall sleeve with the

the polymer wall sleeve. See accessory sleeve

section for selecting the correct sleeve for

your application.

NOTE: in most cases, when replacing the

wall sleeve, the exterior grille must also be

replaced.

• Use an existing sleeve and exterior grille. The

Gree E-TAC will fit into:

—

— Friedrich T series and ZoneAire wall

sleeves, with a required wall sleeve

extension (see accessor

y Friedrich

Retrofit Wall Sleeve Adapter).

E-TAC

Whether you are designing a new structure or

replacing packaged terminal air conditioning units in

an existing building, Gree E-TAC will meet your

needs.

The Gree E-TAC Packaged Terminal Air Conditioning

(E-TAC) unit is designed to meet the needs of the

architect, engineer, and contractor. For unit

installation, Gree’s expert support network will assist

in all applicable aspects of the construction project,

from preparing a budget to start-up.

The following major competitors’ wall

sleeves/grilles: Carrier, GE, Amana,

Trane, Friedrich and Bryant, and NO

accessory retrofit kit is required.

INDOOR FAN PERFORMANCE DATA

Model Voltage

Dry Coil (CFM)*

Wet Coil (CFM)*

Low Medium High Low Medium High

208 235 250 270 220 235 250

230 260 280 300 240 260 280

265 260 280 300 240 260 280