ETAC Product Data Guide

30
30
PERFORMANCE AND ELECTRICAL DATA
GA
MODEL E-TAC GBE SERIES
HEAT/COOL MOD ELS
Rev. Cyc. Electric
GBE073B-D
630,3/694,2046/0262.31/2.218.2/0.3AN2.21/2.210.3/254.2002,01/003,8A/N007,7/006,7
GBE093B-D
630,3/694,2008/0772.31/2.217.3/9.3AN3.11/4.110.3/254.2002,01/003,8A/N000,9/008,8
GBE123B-D
630,3/694,2021,1/021,12.31/2.211.5/3.5AN7.01/5.010.3/254.2002,01/003,8A/N000,21/008,11
GBE125B-D
730,5/811,4021,1/021,15.12/5.021.5/3.5AN7.01/5.010.5/780.4000,71/009,31A/N000,21/008,11
GBE155B-D
14,600/15,000 N/A 13,900/17,000 4.087/5.0 9.8/9.7 NA
187-253
7.5/
6.7 20.5/21.5 1,510/1,530 4,118/5,037
GBE073B-D
97% 0.024 0.1 280/300 20 16.5 B 18 1.7 84% 126
GBE093B-D
99% 0.028 0.2 280/300 20 16.5 B 21.5 2.1 81% 128
GBE123B-D
99% 0.031 0.2 290/310 20 16.5 B 26.8 2.7 67% 132
GBE125B-D
99% 0.031 0.2 290/310 30 27.2 C 26.8 2.7 67% 132
GBE155B-D
98% 0.031 0.2 320/340 30 27.2 C 38.09 3.5 65% 141
DNEGEL.39-083dradnatSIRAhtiwecnadroccanidetaR*
oitaRycneiciffEygrenE—REE.erutarepmettneibmaroodtuoF74ta)POC(ecnamrofrePfotneiciffeoC†
ecnamrofrepfotneiciffeoC—POC.rewoprotomnafdnarewopretaehecnatsise
rcirtcelE**
CFM — Cubic
feet per minute
MODEL
NUMBER E-
TAC-
VOLTAGE
RANGE
CAPACITY* (Btuh)
gnilooC †POCREE
Heating
HEATER
KW
187-253
INDOOR FAN
Horsepower
Full Load
Amps
CFM HI
Speed
RECEP-
TACLE
TYPE
R-410A
CHARGE
(oz)
DEHUMIDIFI-
CACTION
(Pints/Hr)
SENSIBLE
HEAT
FACTOR
APPROX.
CHASSIS
SHIP WT.
(lbs)
MODEL
NUMBER PTAC-
POWER
FACTOR (%)
MAX FUSE
SIZE
(Amps)
MIN.
CIRCUIT
AMP.
Cooling Heating** Heating
AMPS WATTS
Cooling
208/230V HEAT PUMP MODELS
Rev. Cyc. Electric
ETAC-07HP230V15B-A 7,600/7,700 6,100/6,300 5,200/6,8001.6/2.0 12.2/12.03.4/3.4 126 A
ETAC-07HP230V20B-A 7,600/7,700 6,100/6,300 8,300/10,2002.4/3.0 12.2/12.03.4/3.4 126 B
ETAC-09HP230V15B-A 8,800/9,000 7,900/8,100 5,200/6,8001.6/2.0 11.4/11.33.3/3.3 130 A
ETAC-09HP230V20B-A 8,800/9,000 7,900/8,100 8,300/10,2002.4/3.0 11.4/11.33.3/3.3 130 B
ETAC-12HP230V15A-A 11,800/12,000 10,500/10,700 5,200/6,8001.6/2.0 10.5/10.73.1/3.1 135 A
ETAC-12HP230V20A-A 11,800/12,000 10,500/10,700 8,300/10,2002.4/3.0 10.5/10.73.1/3.1 135 B
ETAC-12HP230V30A-A 11,800/12,000 10,500/10,700 13,900/17,0004.1/5.0 10.5/10.73.1/3.1 135 C
ETAC-15HP230V20B-A 14200/14,500 13,000/13,300 8,300/10,2002.4/3.0 9.7/9.83.0/3.0 143 B
ETAC-15HP230V30B-A 14200/14,500 13,000/13,300 13,900/17,0004.1/5.0 9.7/9.83.0/3.0 143 C
Horsepower
Full Load
Amps
CFM HI
Speed
ETAC-07HP230V15B-A 97% 0.028 0.42 280/29422.91.7 84%
ETAC-07HP230V20B-A 97% 0.028 0.42 280/29422.91.7 84%
ETAC-09HP230V15B-A 99% 0.028 0.36 280/31225.02.1 81%
ETAC-09HP230V20B-A 99% 0.028 0.36 280/31225.02.1 81%
ETAC-12HP230V15A-A 99% 0.031 0.36 290/33026.82.7 67%
ETAC-12HP230V20A-A 99% 0.031 0.36 290/33026.82.7 67%
ETAC-12HP230V30A-A 99% 0.031 0.36 290/33026.82.7 67%
ETAC-15HP230V20B-A 98% 0.031 0.8 320/34138.13.2 65%
ETAC-15HP230V30B-A 98% 0.031 0.8 320/34138.13.2 65%
CoolingHeating CoolingHeating**
ETAC-07HP230V15B-A 620/6401,635/2,0003.0/2.8 7.9/8.91511.1
ETAC-07HP230V20B-A 620/6402,452/3,0003.0/2.8 12.2/13.22016.5
ETAC-09HP230V15B-A 770/8001,635/2,0003.9/3.7 7.9/8.91511.1
ETAC-09HP230V20B-A 770/8002,452/3,0003.9/3.7 12.2/13.22016.5
ETAC-12HP230V15A-A 1,120/1,120 1,635/2,0005.7/5.1 7.9/8.91511.1
ETAC-12HP230V20A-A 1,120/1,120 2,452/3,0005.7/5.1 12.2/13.22016.5
ETAC-12HP230V30A-A 1,120/1,120 4,087/5,0005.7/5.1 20.5/21.53027.2
ETAC-15HP230V20B-A 1,460/1,480 2,452/3,0007.5/6.7 12.2/13.22016.5
ETAC-15HP230V30B-A 1,460/1,480 4,087/5,0007.5/6.7 20.5/21.53027.2
*Rated in accordance with ARI Standard 380-93. LEGEND
†Coefficient of Performance (COP) at 47 F outdoor ambient temperature
**Electric resistance heater power and fan motor power.
AMPS
(or HACR Circuit Breaker)
TIME-DELAY TYPE FUSE 15 20 30
RATED VOLTS250 250250
15 20 30
NEMA CONFIGURATION6-15R 6-20R 6-30R
MIN. CIRCUIT
AMP.
187-253
RECEPTACLE
ABC
MODEL NUMBER
VOLTAGE
RANGE
WATTSAMPS
MAX FUSE
SIZE (Amps)
RECEP-
TACLE
TYPECooling
Heating
MODEL NUMBER
POWER
FACTOR (%)
INDOOR FAN
R-410A
CHARGE
(oz)
DEHUMIDIFI-
CACTION
(Pints/Hr)
SENSIBLE
HEAT
FACTOR
MODEL NUMBER
CAPACITY* (Btuh)
HEATER
KW
EERCOP†
CHASSIS
SHIP WT.
(lbs)
APPLICATIONS
• Hotels and motels
• Nursing homes and assisted living care
centers
• Offices
• Apartments
• Single--family dwellings
• Home conversions and residential add--ons
NEW CONSTRUCTION
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
• Whisper--quiet performance, indoors and out
• No bulky duct system
• No separate equipment room
• No water towers or additional cooling
equipment
• No complex match--up of different HVAC
components
• Less sensitivity to building orientation (sun,
wind, shade)
• Optional architectural grille to permit custom
exterior appearance
I nitial Cost Savings for the Buildin
g Owner
• No e
xpensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
Lower Operating Costs and Reliable Comfort
for The Occupant
• Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
• Individual units allow tenants to choose the
degree of comfort and operating economy.
• Rapid servi
cing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
• Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
—
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see access
ory Friedrich
Retrofit Wall Sleeve Adapter).
E-TAC
Whether you are designing a new structure or
replacing packaged terminal air conditioning units in
an existing building, Gree E-TAC will meet your
needs.
The Gree E-TAC Packaged Terminal Air Conditioning
(E-TAC) unit is designed to meet the needs of the
architect, engineer, and contractor. For unit
installation, Gree’s expert support network will assist
in all applicable aspects of the construction project,
from preparing a budget to start-up.
4
The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
EER — Energy Efficiency Ratio
COP — Coefficient of performance
CFM — Cubic feet per minute