ETAC Product Data Guide

ManualsBrandsGREE ManualsHeating, Ventilation, and Air Conditioning9,000 BTU Packaged Terminal Air Conditioning (0.75 Ton) + 3 kW Electrical Heater (11.3 EER) 265V

TWO--PIECE LIFETIME INDOOR

FILTER

Two--piece removable filters easily slide in and out

from the front of the E-TAC unit and are

interchangeable. The front panel does not need to be

removed to access or change the filters. The filters are

washable and permanent.

2 Air filters

Tw o --Piece Indoor Filte r

E-TAC PRODUCT FEATURES AND BENEFITS

EASY ACCESS TO CHASSIS

Access to the chassis simply requires removing front

panel, then four easy to access screws and then

sliding the chassis out of the sleeve for service or

maintenance.

A07057

Easy to Access Chassis

OUTDOOR AIR VENTILATION

The vent wi ll provide fresh air. For vent airflow

data see page 37.

A07550

Outdoor Air Ventilation

The unique vent system is activated by a two-

position control. Fresh outside air is redirected by

the vent door to the indoor room. A molded plastic

filter prevents dirt and debris from entering the

room side of the unit. The vent mechanism is made

from non corrosive material ensuring reliable

operation. A magnet

or screw on the door and

high-pressure airflow create a tight, draft free seal

when the vent door is closed.

E-TAC 5-YEAR WARRANTY

All E-TACs are protected by a ve-year limited

warranty.

•Two-yearpartsandlaborlimitedwarranty

• Three years additional parts and labor coverage on

the sealed refrigeration system

• Limitedthreeyears(years3-5)parts-onlycoverage

APPLICATIONS

• Hotels and motels

• Nursing homes and assisted living care

centers

• Offices

• Apartments

• Single--family dwellings

• Home conversions and residential add--ons

NEW CONSTRUCTION

ADVANTAGES FOR NEW

CONSTRUCTION

Design Flexibility for the Architect/Engineer

• Whisper--quiet performance, indoors and out

• No bulky duct system

• No separate equipment room

• No water towers or additional cooling

equipment

• No complex match--up of different HVAC

components

• Less sensitivity to building orientation (sun,

wind, shade)

• Optional architectural grille to permit custom

exterior appearance

I nitial Cost Savings for the Buildin

g Owner

• No e

xpensive component HVAC system

purchase

• No equipment room or maintenance

engineering staff

• Two--part delivery to minimize on--site

damage

• Weather--protected wall sleeve that goes in

place during construction; chassis that slides

in place after construction

• No seasonal changeover required for cooling

or heating -- units are self--contained comfort

systems

Lower Operating Costs and Reliable Comfort

for The Occupant

• Heat pump models offer substantial savings

over models with conventional electric

resistance heaters

• Individual units allow tenants to choose the

degree of comfort and operating economy.

• Rapid servi

cing reduces downtime: complete

chassis can be replaced in minutes without

disrupting other occupants.

• Each unit operates independently of other

units in the building. No dependency by

building on central HVAC system.

RETROFIT/REPLACEMENT

If you are replacing a unit in an existing wall sleeve,

your options include:

• Replace the existing wall sleeve with the

the polymer wall sleeve. See accessory sleeve

section for selecting the correct sleeve for

your application.

NOTE: in most cases, when replacing the

wall sleeve, the exterior grille must also be

replaced.

• Use an existing sleeve and exterior grille. The

Gree E-TAC will fit into:

—

— Friedrich T series and ZoneAire wall

sleeves, with a required wall sleeve

extension (see access

ory Friedrich

Retrofit Wall Sleeve Adapter).

E-TAC

Whether you are designing a new structure or

replacing packaged terminal air conditioning units in

an existing building, Gree E-TAC will meet your

needs.

The Gree E-TAC Packaged Terminal Air Conditioning

(E-TAC) unit is designed to meet the needs of the

architect, engineer, and contractor. For unit

installation, Gree’s expert support network will assist

in all applicable aspects of the construction project,

from preparing a budget to start-up.

The following major competitors’ wall

sleeves/grilles: Carrier, GE, Amana,

Trane, Friedrich and Bryant, and NO

accessory retrofit kit is required.

Exclusive Warranty

E-TAC GB Series

Packaged Terminal Air Conditioner

Limited Warranty

TWO-YEAR PARTS AND LABOR LIMITED WARRANTY – During the ﬁ rst two years

after purchase, GREE will, through its authorized independent servicing dealer or service

stations*, and free of charge to the user or subsequent users, repair or replace any par ts

that fail due to defect in material or workmanship. The replacement part can be a new or

remanufactured part as provided at GREE’S sole option.

EXTENDED THREE-YEAR PARTS AND LABOR LIMITED WARRANTY ON SEALED

REFRIGERATION SYSTEM ONLY – During the third through ﬁ fth years after date

of original purchase, GREE will, through its authorized servicing dealers and ser vice

stations* and free of charge to the end user or subsequent users, repair or replace the

compressor, condenser, evaporator or connecting tubing if it failed due to defect in material

or workmanship. This includes system refrigeration charge. The replacement part can be

new or a remanufactured part at GREE’S sole option.

EXTENDED THREE-YEAR PARTS ONLY LIMITED WARRANTY ON NON-SEALED

REFRIGERATION SYSTEM ONLY – During the third through ﬁ fth years after date of original

purchase, Gree will, through its authorized servicing dealers and service stations and free

of charge to the end user or subsequent users, repair or replace any non-sealed system

part (motor, solenoid, thermistor, circuit boards, relays, switch, capacitor, overload, drain

valve, fan, stator) if failed due to defect in material or workmanship. The replacement part

can be new or a remanufactured part at GREE’S sole option. THIS LIMITED WARRANTY

DOES NOT INCLUDE LABOR, user is responsible for labor, including cost of diagnosis of

problem, removal and transportation of the air conditioner to and from the service center,

and reinstallation charges necessary to accomplish repair.

LIMITATION OF WARRANTIES – ALL IMPLIED WARRANTIES (INCLUDING IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PA RTICULAR USE OR

PURPOSE) ARE HEREBY LIMITED IN DURATION TO THE PERIOD FOR WHICH

EACH LIMITED WARRANTY IS GIVEN AND APPLIES. SOME STATES DO NOT ALLOW

LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE

LIMITATION MAY NOT APPLY TO YOU. THE EXPRESSED WARRANTIES MADE IN

THIS WARRANTY ARE EXCLUSIVE AND MAY NOT BE ALTERED, ENLARGED

, OR

CHANGED BY ANY DISTRIBUTOR, DEALER, OR OTHER PERSON WHATSOEVER.

ALL WORK UNDER THE TERMS OF THIS WARRANTY SHALL BE PERFORMED

DURING NORMAL WORKING HOURS. ALL REPLACEMENT PA RTS, WHETHER

NEW OR REMANUFACTURED, ASSUME AS THEIR WARRANTY PERIOD ONLY THE

REMAINING TIME PERIOD OF THIS WARRANTY.

*Authorized independent dealers or service stations are registered with Gree through its distributor organization.

This warranty gives you speciﬁ c legal rights, and you may also have other rights which vary from state to state.

Edition Date: 11-11

GREE WILL NOT BE RESPONSIBLE FOR:

1. CLEANING REQUIRED PRIOR TO WARRANTY REPAIR.

2. Standard maintenance, cleaning or damage resulting from failure to perform

normal maintenance as outlined in the owner’s manual.

3. Instruction on methods of control and use of air conditioning unit after initial

installation.

4. Damage or repairs needed as consequence of faulty installation or application.

This is the responsibility of the installer.

5. Failure to start due to voltage conditions, blown fuses, open circuit breakers or any

other damages due to the inadequacy or interruption of electrical services.

6. Damage or repairs needed as consequence of any misapplication, abuse,

unauthorized alteration, improper servicing or operation.

7. Damage as a result of ﬂ oods, winds, ﬁ res, lightning, accidents, corrosive

environment, or other conditions beyond the control of GREE.

EXCEPTION TO CORROSIVE ENVIRO NMENT EXCLUSION IN ABOVE

PARAGRAPH – Packed terminal units (GB Series) built with corrosion protection

are exempt from the exclusion – “Corrosive Environment.” The unit model number

is identiﬁed on the nameplate with CP sufﬁx.

8. Reimbursement for replacement parts or repair services which are not supplied or

designated by GREE and which are speciﬁ cally covered under this warranty.

9. GREE products installed outside the continental U.S.A., Alaska, Hawaii, and

Canada.

10. Shipping damage or damage as a result of transporting the unit. This is the

responsibility of the selling dealer or the authorized service station.

11. ANY SPECIAL, INDIRECT OR CONSEQUENTIAL PROPERTY OR

COMMERCIAL DAMAGE OF ANY NATURE WHATSOEVER. Some states do not

allow the exclusion or limitation of incidental or consequential damages, so the

above limitation or exclusion may not apply to you.

12. Warranty coverage of accessor

y items (wall thermostats, wall sleeves

, etc.)

13. Installations of non-corrosion protected models within one (1) mile of a corrosive

body of water or environment shall vo id the EXTENDED THREE-YEAR PARTS

AND LABOR LIMITED WARRANTY ON SEALED REFRIGERATION SYSTEM

ONLY and EXTENDED THREE-YEAR PARTS ONLY LIMITED WARRANTY ON

NON-SEALED REFRIGERATION SYSTEM ONLY limited warranties .