ETAC Product Data Guide

18
Air Deector
PartNo.:PTAC-DEFLECTOR-A
The PTAC Air Deector mounts easily to the units
and directs air up and away from overhanging drapes.
TheAirDeectorsavesenergybyeliminatingtrapped
air ow between the window and the curtain while
increasing guest comfort levels and helping to manage
mold and mildew in the window area.
Sound Muzzler
PartNo.:PTAC-SOUND-A
Our Sound Muzzler is specically designed and
constructed with environmental friendly materials that
absorbmechanicalsoundenergyandblockoffensive
noise from the compressor. This acoustic wrap is
weatherproof and easy to install.
Security Door
PartNo.:PTAC-LOCK-A
This key-locking security door kit prevents
unauthorized access to the unit’s heating and cooling
controls and prevents tampering with units in public
locationsandinstitutions.Thiseld-installedaccessory
includes a control door with lock assembly and two
matchingkeys.
FIELD-INSTALLED
ACCESSORIES (CONT.)
E-9000 Remote Control
E-9000 Remote Control
Part No. 30510092MX
The E-9000 remote control is versatility and allows
users to change room temperature and modes from
the palm of your hand. The large LCD display
and buttons makes it easy-to-understand and
easy-to-use.
Air Deector
Security Door
Sound Muzzler
APPLICATIONS
• Hotels and motels
• Nursing homes and assisted living care
centers
• Offices
• Apartments
• Single--family dwellings
• Home conversions and residential add--ons
NEW CONSTRUCTION
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
• Whisper--quiet performance, indoors and out
• No bulky duct system
• No separate equipment room
• No water towers or additional cooling
equipment
• No complex match--up of different HVAC
components
• Less sensitivity to building orientation (sun,
wind, shade)
• Optional architectural grille to permit custom
exterior appearance
I nitial Cost Savings for the Buildin
g Owner
• N
o expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
Lower Operating Costs and Reliable Comfort
for The Occupant
• Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
• Individual units allow tenants to choose the
degree of comfort and operating economy.
• Rapi
d servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
• Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
—
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
ex
tension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
E-TAC
Whether you are designing a new structure or
replacing packaged terminal air conditioning units in
an existing building, Gree E-TAC will meet your
needs.
The Gree E-TAC Packaged Terminal Air Conditioning
(E-TAC) unit is designed to meet the needs of the
architect, engineer, and contractor. For unit
installation, Gree’s expert support network will assist
in all applicable aspects of the construction project,
from preparing a budget to start-up.
4
The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.