Performance And Specification Sheet

12
15
FIELD--INSTALLED ACCESSORIES
POLYMER WALL SLEEVES
All polymer wall sleeves are made from a molded
polymer that is designed for strength and durability.
This material has excellent corrosion resistance and a
flammability rating of UL94--5V.
The sleeve surface is textured to prevent shine and
hide scratches. The rib configuration on the sleeve
bottom allows easy chassis removal and aids in
drainage
easy fastening of the sleeve to wall openings. Refer to
Insulated Polymer Wall Sleeve
Part No.: SLEEVE--INSUL--1PK
Gree’s accessory insulated polymer wall sleeve,
with factory--installed insulation, provides superior
sound absorption, reduces heat loss and prevents
sleeve sweating, a condition that can occur when the
outside temperature is cold and the indoor conditions
are warm and humid.
A07633
Corrosion-Protected Polymer Sleeve
Non--Insulated Polymer Wall Sleeve
Part No.: WALL--SLEEVE--1PK
Gree’s accessory non-insulated polymer wall sleeve
provides a superior appearance and protection for
many appli
cation
s.
For the best performance and longest life, Gree
recommends genuine polymer wall sleeves for all
installations.
dimension drawings in Typical Wall Installation
and Dimension section.
The sleeve’s alpine mist color (a shade of beige)
closely matches the front panel and blends in well
with any inside or outside decor. The polymer wall
sleeve comes in both insulated (factory installed) or
non-insulated, to meet the requirements of every
application.
IMPORTANT For applications where weather
conditions could influence sleeve sweating, a
condition that can occur when the outside
temperature is cold and the indoor conditions are
warm and humid, the Insulated Polymer Wall
Sleeve should be considered.
C
e
r
t
i
f
i
e
d
S
e
a
c
o
a
s
t
P
r
o
t
e
c
t
i
o
n
16 in
42 in
(1067 mm)
(406 mm)
14 7/8 in
(378 mm)
The locating holes in the side and top panels allow for