Performance And Specification Sheet

13
16
FIELD--INSTALLED ACCESSORIES (CONT.)
Metal Insulated Wall Sleeves
Part No.: SLEEVE--STEEL--1PK
SLEEVE--EXT18--1PK
SLEEVE--EXT24--1PK
SLEEVE--EXT26--1PK
SLEEVE--EXT28--1PK
Gree’s metal wall sleeves are available in a variety
of sizes for most applications and difficult
installations. Choose from 14--3/4 in., 18 in., 24 in.,
26 in., or 28 in. (375 mm, 457mm, 610 mm, 660 mm,
and 711 mm) standard depth sizes. All metal wall
sleeves come with factory--installed insulation,
designed to minimize heat loss, reduce outdoor noise
transmissions into the room and prevent sleeve
sweating. In addition, the metal wall sleeve provides
a flammability rating higher than UL94--5V.
A07381
42 in
(1067)
16 in
(406)
Available in:
14-3/4 in. (375),
18 in. (457),
24 in. (610),
26 in. (660),
28 in. (711)
Amounts in ( ) = mm
Metal Wall Sleeve
Wall Sleeve Molding Kit
1/2 IN.
(12.7 mm)
1 IN.
(25.4 mm)
A08395
Wall Sleeve Molding Kit
Friedrich (and ZoneAire) Retrofit Wall Sleeve
Adapter
Part No.: FR--SLEEVE--EXT
42 IN.
(1067 mm)
16 IN.
(406.4 mm)
3 IN.
(76.2 mm)
A08396
Friedrich Wall Sleeve Adapter Kit
GA
Part No.: SLEEVE–MOLDING
For a superior look and to hide any construction
imperfections, use Gree’s wall sleeve molding kit to
trim the wall sleeve to the wall. The molding kit is a
perfect solution and can be used with any Gree wall
sleeve (matches wall sleeve color).
The Friedrich (and ZoneAire) wall sleeve adapter is
constructed of metal and is designed to increase the
depth of an existing Friedrich T-series or ZoneAire wall
sleeve to accommodate all industry standard PTAC
units.