Performance And Specification Sheet

28
MODEL E-TAC GBE SERIES
HEAT/COOL MOD ELS
Rev. Cyc. Electric
GBE073B-P
630,355623.116.2AN0.110.3002,01A/N002,7
GBE093B-P
630,300823.112.3AN3.110.3002,01A/N000,9
GBE123B-P
630,3021,123.116.4AN7.010.3002,01A/N000,21
GBE125B-P
730,5021,178.816.4AN7.010.5000,71A/N000,21
GBE155B-P
730,5035,178.819.5AN8.90.5000,71A/N000,51
GBE073B-P
97% 0.028 0.1 280/300 20 16.5 C 19.75 1.7 84% 124
GBE093B-P
99% 0.028 0.2 280/300 20 16.5 C 19.40 2.1 81% 126
GBE123B-P
99% 0.031 0.2 290/310 20 16.5 C 25.04 2.7 67% 132
GBE125B-P
99% 0.031 0.2 290/310 30 27.2 D 25.04 2.7 67% 132
GBE155B-P
98% 0.031 0.2 320/340 30 27
.2 D 40.21 3.5 65% 141
DNEGEL.39-083dradnatSIRAhtiwecnadroccanidetaR*
oitaRycneiciffEygrenE—REE.erutarepmettneibmaroodtuoF74ta)POC(ecnamrofrePfotneiciffeoC†
ecnamrofrepfotneiciffeoC—POC.rewoprotomnafdnarewopretaehecnatsisercirtcelE**
CFM — Cubic feet per minute
239-292
MODEL
NUMBER E-
TAC-
VOLTAGE
RANGE
CAPACITY* (Btuh)
gnilooC †POCREE
Heating
HEATER
KW
SENSIBLE
HEAT
FACTOR
APPROX.
CHASSIS
SHIP WT.
(lbs)
MODEL
NUMBER PTAC-
POWER
FACTOR (%)
MAX FUSE
SIZE
(Amps)
MIN.
CIRCUIT
AMP.
INDOOR FAN
Horsepower
RECEP-
TACLE
TYPE
Full Load
Amps
CFM HI
Speed
Cooling Heating** Heating
AMPS WATTS
Cooling
R-410A
CHARGE
(oz)
DEHUMIDIFI-
CACTION
(Pints/Hr)
32
PERFORMANCE AND ELECTRICAL DATA (CONT. )
GA
MODEL E-TAC GBA SERIES
HEAT PUMP MODELS
Rev. Cyc. Electric
GBA073B-D
630,3/694,2046/0262.31/2.218.2/0.34.3/4.32.21/2.210.3/254.2002,01/003,8003,6/001,6007,7/006,7
GBA093B-D
630,3/694,2008/0772.31/2.217.3/9.33.3/3.33.11/4.110.3/254.2002,01/003,8001,8/009,7000,9/008,8
GBA123B-D
630,3/694,2021,1/021,12.31/2.211.5/3.51.3/1.37.01/5.010.3/254.2002,01/003,8007,01/005,01000,21/008,11
GBA125B-D
730,5/811,4021,1/021,15.12/5.021.5/3.51.3/1.37.01/5.010.5/780.4000,71/009,
31007,01/005,01000,21/008,11
GBA155B-D
15000 13,800 17,000 5 9.8 2.9
207-253
6.7 21.5 1,530 5,037
GBA073B-D
97% 0.028 0.1 280/300 20 16.5 B 20.46 1.7 84% 126
GBA093B-D
99% 0.028 0.2 280/300 20 16.5 B 25 2.1 81% 131
GBA123B-D
99% 0.031 0.2 290/310 20 16.5 B 26.8 2.7 67% 135
GBA125B-D
99% 0.031 0.2 290/310 30 27.2 C 26.8 2.7 67% 135
GBA155B-D
98% 0.031 0.2 320/340 30 27.2 C 38.09 3.5 65% 144
DNEGEL.39-083dradnatSIRAhtiwecnadroccanidetaR*
oitaRycneiciffEygrenE—REE.erutarepmettneibmaroodtuoF74ta)POC(ecnamrofrePfotneiciffeoC†
ecnamrofrepfotneiciffeoC—POC.re
woprotomnafdnarewopretaehecnatsisercirtcelE**
CFM — Cubic feet per minute
MODEL
NUMBER PTAC-
POWER
FACTOR (%)
INDOOR FAN
MAX FUSE
SIZE
(Amps)
Horsepower
Full Load
Amps
CFM HI
Speed
MIN.
CIRCUIT
AMP.
RECEP-
TACLE
TYPE
R-410A
CHARGE
(oz)
DEHUMIDIFI-
CACTION
(Pints/Hr)
AMPS WATTS
SENSIBLE
HEAT
FACTOR
APPROX.
CHASSIS
SHIP WT.
(lbs)
187-253
Cooling Heating** Cooling Heating
VOLTAGE
†POC EGNAR
MODEL
NUMBER E-
TAC-
CAPACITY* (Btuh)
HEATER
gnilooC REEWK
Heating
APPLICATIONS
• Hotels and motels
• Nursing homes and assisted living care
centers
• Offices
• Apartments
• Single--family dwellings
• Home conversions and residential add--ons
NEW CONSTRUCTION
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
• Whisper--quiet performance, indoors and out
• No bulky duct system
• No separate equipment room
• No water towers or additional cooling
equipment
• No complex match--up of different HVAC
components
• Less sensitivity to building orientation (sun,
wind, shade)
• Optional architectural grille to permit custom
exterior appearance
I nitial Cost Savings for the Buildin
g Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
Lower Operating Costs and Reliable Comfort
for The Occupant
• Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
• Individual units allow tenants to choose the
degree of comfort and operating economy.
• R
apid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
• Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
—
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
E-TAC
Whether you are designing a new structure or
replacing packaged terminal air conditioning units in
an existing building, Gree E-TAC will meet your
needs.
The Gree E-TAC Packaged Terminal Air Conditioning
(E-TAC) unit is designed to meet the needs of the
architect, engineer, and contractor. For unit
installation, Gree’s expert support network will assist
in all applicable aspects of the construction project,
from preparing a budget to start-up.
4
The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
265 V HEAT/COOL MODELS
Rev. Cyc. Electric
07HC265V20A-A
7,200
N/A
10,200 3.0 11.0
NA
2.6 11.32 655 3,036
09HC265V20A-A
9,000
N/A
10,200 3.0 11.3
NA
3.2 11.32 800 3,036
12HC265V20A-A
12,000
N/A
10,200 3.0 10.7
NA
4.6 11.32 1,120 3,036
12HC265V30A-A
12,000
N/A
17,000 5.0 10.7
NA
4.6 18.87 1,120 5,037
15HC265V20A-A
15,000
N/A
10,200 3.0 9.8
NA
4.6 11.32 1,120 3,036
15HC265V30A-A
15,000
N/A
17,000 5.0 9.8
NA
5.9 18.87 1,530 5,037
Horsepower
Full Load
Amps
CFM HI
Speed
07HC265V20A-A
97% 0.028 0.1
300
20 16.5
E
19.75 1.7 84% 124
09HC265V20A-A
99% 0.028 0.2
300
20 16.5
E
19.40 2.1 81% 126
12HC265V20A-A
99% 0.031 0.2
310
20 16.5
E
25.04 2.7 67% 132
12HC265V30A-A
99% 0.031 0.2
310
30 27.2
F
25.04 2.7 67% 132
15HC265V20A-A
98% 0.031 0.2
320
20 16.5
E
40.21 3.5 65% 141
15HC265V30A-A
98% 0.031 0.2
320
30 27.2
F
40.21 3.5 65% 141
*Rated in accordance with ARI Standard 380-93.
LEGEND
†Coefficient of Performance (COP) at 47 F outdoor ambient temperature.
EER — Energy Efficiency Ratio
**Electric resistance heater power and fan motor power. COP — Coefficient of performance
CFM — Cubic feet per minute
AMPS
20
30
(or HACR Circuit Breaker)
TIME-DELAY TYPE FUSE
15
20
30
15
SENSIBLE
HEAT
FACTOR
APPROX.
CHASSIS
SHIP WT.
(lbs)
20
30
277
277
E
F
7-20R
7-30R
MODEL NUMBER
ETAC-
CAPACITY* (Btuh)
HEATER
KW
EER
COP†
WATTS
Cooling
Heating
Cooling
Heating**
Cooling
Heating
AMPS
VOLTAGE
RANGE
239-292
MODEL NUMBER
ETAC-
POWER
FACTOR
(%)
INDOOR FAN
MAX
FUSE
SIZE
(Amps)
MIN.
CIRCUIT
AMP
RECEP-
TACLE
TYPE
RECEPTACLE
A
B
C
D
15
20
30
15
R-410A
CHARGE
(oz)
DEHUMIDIFI-
CACTION
(Pints/Hr)
NEMA CONFIGURATION
6-15R
6-20R
6-30R
7-15R
RATED VOLTS
250
250
250
277
APPLICATIONS
• Hotels and motels
• Nursing homes and assisted living care
centers
• Offices
• Apartments
• Single--family dwellings
• Home conversions and residential add--ons
NEW CONSTRUCTION
ADVANTAGES FOR NEW
CONSTRUCTION
Design Flexibility for the Architect/Engineer
• Whisper--quiet performance, indoors and out
• No bulky duct system
• No separate equipment room
• No water towers or additional cooling
equipment
• No complex match--up of different HVAC
components
• Less sensitivity to building orientation (sun,
wind, shade)
• Optional architectural grille to permit custom
exterior appearance
I nitial Cost Savings for the Buildin
g Owner
• No expensive component HVAC system
purchase
• No equipment room or maintenance
engineering staff
• Two--part delivery to minimize on--site
damage
• Weather--protected wall sleeve that goes in
place during construction; chassis that slides
in place after construction
• No seasonal changeover required for cooling
or heating -- units are self--contained comfort
systems
Lower Operating Costs and Reliable Comfort
for The Occupant
• Heat pump models offer substantial savings
over models with conventional electric
resistance heaters
• Individual units allow tenants to choose the
degree of comfort and operating economy.
• R
apid servicing reduces downtime: complete
chassis can be replaced in minutes without
disrupting other occupants.
• Each unit operates independently of other
units in the building. No dependency by
building on central HVAC system.
RETROFIT/REPLACEMENT
If you are replacing a unit in an existing wall sleeve,
your options include:
• Replace the existing wall sleeve with the
the polymer wall sleeve. See accessory sleeve
section for selecting the correct sleeve for
your application.
NOTE: in most cases, when replacing the
wall sleeve, the exterior grille must also be
replaced.
• Use an existing sleeve and exterior grille. The
Gree E-TAC will fit into:
—
— Friedrich T series and ZoneAire wall
sleeves, with a required wall sleeve
extension (see accessory Friedrich
Retrofit Wall Sleeve Adapter).
E-TAC
Whether you are designing a new structure or
replacing packaged terminal air conditioning units in
an existing building, Gree E-TAC will meet your
needs.
The Gree E-TAC Packaged Terminal Air Conditioning
(E-TAC) unit is designed to meet the needs of the
architect, engineer, and contractor. For unit
installation, Gree’s expert support network will assist
in all applicable aspects of the construction project,
from preparing a budget to start-up.
4
The following major competitors’ wall
sleeves/grilles: Carrier, GE, Amana,
Trane, Friedrich and Bryant, and NO
accessory retrofit kit is required.
AMPS
20 30
(or HACR Circuit Breaker)
TIME-DELAY TYPE FUSE15203015
20 30
27
72
77
EF
7-20R 7-30R
RECEPTACLE
ABCD
15 20 30 15
NEMA CONFIGURATION 6-15R 6-20R 6-30R 7-15R
RATED VOLTS 250 250 250 277