Performance and Specifications

ManualsBrandsGree ManualsAir ConditionersPTAC Air Conditioner Cooling Area, Adjustable Air Direction

3.0 DELIVERY, ST ORAGE, AND

HANDLING

The packaging of the chassis shall be sufficient to

p rotect the chassis from damage during shipment via

an enclosed tr uck. Cha ssis must also be able to

withstand an impact force of 8 g’s and a random

continuous force of 1g, during shipping.

Chassis, wall sleeves, and grilles shall be shipped i n

s eparate cartons. Universal handling instructions

s hall be defined and visible on the carton, from front,

back and sides.

Chassis shall be capab le of withstanding

temperatures from --40

F to 155

F (--40

C to

68.3

C), at 5 to 95 p er cent RH, non--cond ensing,

during shipment an

d sto

rage, without co mponent

failure.

Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.

Catalog No. PTAC-GB-5PD

Printed in U.S.A. Edition Date: 10/13

NOTES:

________________________________________________________________________________________

_______________

_________________________________________________________________________

________________________________________________________________________________________

3.0 DELIVERY, ST ORAGE, AND

HANDLING

The packaging of the chassis shall be sufficient to

p rotect the chassis from damage during shipment via

an enclosed tr uck. Cha ssis must also be able to

withstand an impact force of 8 g’s and a random

continuous force of 1g, during shipping.

Chassis, wall sleeves, and grilles shall be shipped i n

s eparate cartons. Universal handling instructions

s hall be defined and visible on the carton, from front,

back and sides.

Chassis shall be capab le of withstanding

temperatures from --40

F to 155

F (--40

C to

68.3

C), at 5 to 95 p er cent RH, non--cond ensing,

during shipment an

d sto

rage, without co mponent

failure.

Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.

Catalog No. PTAC-GB-5PD

Printed in U.S.A. Edition Date: 10/13

NOTES:

________________________________________________________________________________________

_______________

_________________________________________________________________________

________________________________________________________________________________________

APPLICATIONS

• Hotels and motels

• Nursing homes and assisted living care

centers

• Offices

• Apartments

• Single--family dwellings

• Home conversions and residential add--ons

NEW CONSTRUCTION

ADVANTAGES FOR NEW

CONSTRUCTION

Design Flexibility for the Architect/Engineer

• Whisper--quiet performance, indoors and out

• No bulky duct system

• No separate equipment room

• No water towers or additional cooling

equipment

• No complex match--up of different HVAC

components

• Less sensitivity to building orientation (sun,

wind, shade)

• Optional architectural grille to permit custom

exterior appearance

I nitial Cost Savings for the Buildin

g Owner

• N

o expensive component HVAC system

purchase

• No equipment room or maintenance

engineering staff

• Two--part delivery to minimize on--site

damage

• Weather--protected wall sleeve that goes in

place during construction; chassis that slides

in place after construction

• No seasonal changeover required for cooling

or heating -- units are self--contained comfort

systems

Lower Operating Costs and Reliable Comfort

for The Occupant

• Heat pump models offer substantial savings

over models with conventional electric

resistance heaters

• Individual units allow tenants to choose the

degree of comfort and operating economy.

• Rapi

d servicing reduces downtime: complete

chassis can be replaced in minutes without

disrupting other occupants.

• Each unit operates independently of other

units in the building. No dependency by

building on central HVAC system.

RETROFIT/REPLACEMENT

If you are replacing a unit in an existing wall sleeve,

your options include:

• Replace the existing wall sleeve with the

the polymer wall sleeve. See accessory sleeve

section for selecting the correct sleeve for

your application.

NOTE: in most cases, when replacing the

wall sleeve, the exterior grille must also be

replaced.

• Use an existing sleeve and exterior grille. The

Gree E-TAC will fit into:

—

— Friedrich T series and ZoneAire wall

sleeves, with a required wall sleeve

tension (see accessory Friedrich

Retrofit Wall Sleeve Adapter).

E-TAC

Whether you are designing a new structure or

replacing packaged terminal air conditioning units in

an existing building, Gree E-TAC will meet your

needs.

The Gree E-TAC Packaged Terminal Air Conditioning

(E-TAC) unit is designed to meet the needs of the

architect, engineer, and contractor. For unit

installation, Gree’s expert support network will assist

in all applicable aspects of the construction project,

from preparing a budget to start-up.

The following major competitors’ wall

sleeves/grilles: Carrier, GE, Amana,

Trane, Friedrich and Bryant, and NO

accessory retrofit kit is required.