Instructions / Assembly
Table Of Contents
- 1 Safety Precautions
- 2 Product Introduction
- 3 Installation
- 4 Maintenance
- 4.1 Failures Not Caused by Faults of The AC
- 4.2 Error Code
- 4.3 Unit Maintenance
- 4.4 Notice on Maintenance
- 4.5 After-Sales Services
DC Inverter Series for R410A Unitary Split Air Conditioner
17
3) The whole pipeline should be wound with insulating tape and fixed onto
the wall with fittings.
(2) If the outdoor unit is above the indoor unit, arrange the pipeline according to
the following diagram.
1) Wind the insulating tape from bottom to top.
2) The whole pipeline should be wound together to avoid water returning
to the room.
3) Use saddles to fix the whole pipeline onto the wall.