Installation & Owner's Manual

Table Of Contents

PART NAMES

Indoor unit

Part Name

1. Front Panel

2. Aux. Button

3. Air Filter

4. Horizontal Louver

5. Remote Controller

6. X-41 Wired Tether Controller

(sold separately)

7. Inter-Connection Wire (sold separately)

8. Drain Hose (sold separately)

9. Refrigerant Lines (sold separately)

Outdoor unit

Air outlet

Air inlet

Air outlet

OPERATION OF WIRELESS REMOTE CONTROLLER

CHANGING BATTERIES AND ADDITIONAL NOTES

To change batteries, slide cover off battery compartment on back of remote controller. Remove

and safely discard old batteries. Insert two new AAA 1.5V dry batteries, using correct polarity.

Reattach back cover.

NOTE:

• If the remote controller will not be used for a long time, remove batteries to prevent

leakage damage.

• Be sure to aim the remote controller at the receiver of the main unit when operating.

• When remote emits a signal, icon will flicker; a tone will be heard when unit receives

that signal.

Remove

old batteries

Install

new batteries

CHANGING BATTERIES

TWD-1594 Livo+ owners printer.qxp_Layout 1 2/21/17 2:10 PM Page 13