Technical Product Guide WIRED TETHER CONTROLLER Part Numbers: MC20700140 - XK-19 MC207059 - XK-41
Table of Contents Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Reference Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5 Dimensional Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 System Wiring Diagram .
PRODUCT OVERVIEW SUPERIOR DESIGNS PROVIDE EASY SOLUTIONS TO COMPLEX PROBLEMS GREE Ductless Multi Zone systems provide quiet comfort and energy efficient heating and cooling in up to five different rooms – without ductwork. For most residential and light commercial applications, this is the ideal solution to balance comfort, efficiency and ease of installation. This Inverter-driven system offers Seasonal Energy Efficiency Ratings (SEER) up to 16.
PRODUCT OVERVIEW Self-Diagnostics System Each indoor and outdoor unit continuously runs a series of multi-point diagnostic tests on the system, to automatically scan for unacceptable operating conditions or malfunctions. If such conditions occur, the system takes corrective action or stops. The fault code will be shown on the indoor, outdoor and wired controller displays. Problems and system status are displayed with comprehensive diagnostic codes to simplify system troubleshooting and shorten repair times.
Wired Tether Controller REFERENCE TABLE INDOOR UNIT TETHER CONTROLLER TYPE PART NUMBER NEO WALL MOUNT XK-41 MC207059 CEILING CASSETTE XK-19 MC20700140 SLIM CONCEALED DUCT XK-19 MC20700140 UNIVERSAL FLOOR CEILING XK-19 MC20700140 MINI-FLOOR CONSOLE XK-19 MC20700140 FEATURES AND BENEFITS Attractive Appearance The XK series features a sleek, unobtrusive design that fits seamlessly into any décor.
FEATURES AND BENEFITS Command Center (cont.) Fan Speed The system fan speed (High, Medium, Low or Auto) can be adjusted for peak room comfort and quietness. Room Setpoint The XK series makes dialing in the correct room setpoint temperature a breeze. Most indoor units allow a room setpoint from 61° F to 86° F (16° to 30° C). Timer Mode When needed, the XK series allows you the ability to program a time period (one-half to 24 hours) to which your system will automatically turn ON or OFF.
Wired Tether Controller DIMENSIONAL SPECIFICATIONS A C B B TYPE PART NUMBER A in (mm) B in (mm) C in (mm) XK-41 MC207059 3.625 (92) 3.625 (92) 1.375 (35) XK-19 MC20700140 3.625 (92) 3.625 (92) 1.
INSTALLATION The following is a brief XK-19 and XK-41 Wired Tether Controller installation overview. See Wired Controller Installation Manual for more detailed instructions on installation, start-up, and setup. Connecting Indoor Unit Select a proper location on the wall for mounting the Tether Controller. Install switch box, if required by code. Locate the 26-ft communication cable that came with the Tether Controller.
Limited Warranty Statement Ductless Heat Pump Multi-Split Systems Effective on new GREE Ductless purchases on or after March 1, 2013 GREE distributor (hereinafter “Company”) warrants this product against failure due to defect in materials or workmanship under normal use and maintenance as follows. All warranty periods begin on the date of original installation. If the date cannot be verified, the warranty period begins one hundred twenty (120) days from date of manufacture.
LIMITATIONS OF WARRANTIES All implied warranties and/or conditions (including implied warranties or conditions of merchantability and fitness for a particular use or purpose) are limited to the duration of this limited warranty, some states or provinces do not allow limitations on how long an implied warranty or condition lasts, so the above may not apply to you.
Specifications in this booklet are subject to change without notice. Manufacturer reserves the right to discontinue or modify specifications or designs without notice or without incurring obligations. All rights reserved. Cat# TETHER-1TPG Version: Original © 2014 Gree Electric Appliance, Inc.