Service and Parts Manual
Table Of Contents
- Part Ⅰ: Technical Information
- 1. Summary
- 2. Specifications
- 2.1 Specification Sheet
- 2.2 Cooling Capacity Tables
- 3. Outline Dimension Diagram
- 4. Refrigerant System Diagram
- 5. Electrical Part
- 5.1 Wiring Diagram
- 5.2 PCB Printed Diagram
- 6. Function and Control
- Part Ⅱ: Installation and Maintenance
- 7. Safety Precautions
- 8. Installation Manual
- 8.1 Preparation before Installation
- 8.2 Installation Instruction
- 9. Troubleshooting
- 9.1 Malfunction Indicator
- 9.2 Malfunction Checking and Elimination
- 9.3 Maintenance Method for Normal Malfunction
- 10. Exploded View and Parts List
- 11. Removal Procedure
- Appendix:
53
Installation and Maintenance
Service Manual
Steps Procedure
inhalation tube sub-
assy
oil separator sub-assy
Unsolder all spot welds oil separator sub-assy and
then remove the oil separator sub-assy.
Note:When unsoldering the spot weld, wrap the gas
valve and liquid valve with wet cloth completely to
avoid damage to valve due to high temperature.
Remove all spot welds inhalation tube sub-assy, and
then remove the inhalation tube sub-assy.
Remove all spot welds electromagnetic valve sub-
assy and then remove the electromagnetic valve sub-
assy.
11. Remove oil separator sub-assy
12. Remove
inhalation tube sub-assy
electromagnetic
valve sub-assy
13. Remove electromagnetic valve sub-assy