Service and Parts Manual
Table Of Contents
- Part Ⅰ: Technical Information
- 1. Summary
- 2. Specifications
- 2.1 Specification Sheet
- 2.2 Cooling Capacity Tables
- 3. Outline Dimension Diagram
- 4. Refrigerant System Diagram
- 5. Electrical Part
- 5.1 Wiring Diagram
- 5.2 PCB Printed Diagram
- 6. Function and Control
- Part Ⅱ: Installation and Maintenance
- 7. Safety Precautions
- 8. Installation Manual
- 8.1 Preparation before Installation
- 8.2 Installation Instruction
- 9. Troubleshooting
- 9.1 Malfunction Indicator
- 9.2 Malfunction Checking and Elimination
- 9.3 Maintenance Method for Normal Malfunction
- 10. Exploded View and Parts List
- 11. Removal Procedure
- Appendix:
57
Installation and Maintenance
Service Manual
Steps Procedure
support plate of condenser
condenser
Remove 5 screws connecting condenser and chassis,
and then remove the condenser. Remove 2 screws
connecting support plate of condenser and condenser,
and then remove the support plate of condenser.
24.Remove left side plate
25. Remove condenser
Remove screws connecting left side plate and
support plate of condenser, chassis, and then
remove the left side plate.
left side plate
support plate of condenser
middle isolation
sheet
Remove screws connecting middle isolation sheet
and support plate of condenser, chassis, and then
remove the middle isolation sheet.
23. Remove middle isolation sheet