Service Manual

Super Free Match

Service Manual

MAINTENANCE

145

6.Solder the

pipeline with the

suction and

discharge ports of

the compressor

Solder the connecting

pipe to make them

connected

Note: never let the

flame contact any other

component.

7.Reconnect the

power cords

a) Tighten the fixing

screw of the power

cord.

b) Connect the power

cord.

Note: mark the color

of the power cord and

corresponding terminal.

8.Put back the electric heating belt and the discharge temperature sensor etc.

9.Check and

screw back the

plates

a) Check if the pipe is

well connected.

b) Check if the parts and

wire well connected.

c) If there is no

problem, fix the

cover.