Service Manual
Super Free Match
Service Manual
INSTALLATION
65
2) Put the drain hose into insulating tube.
Wrap the insulating tube with wide rubber belt to prevent the shift of insulating tube. Slant the drain hose
downward slightly for smooth drainage of condensate.
Note:
The insulating tube should be connected reliably with the sleeve outside the outlet pipe. The drain hose should
be slanted downward slightly, without distortion, bulge or fluctuation. Do not put the outlet in the water.
4.2 Installation of Duct Type
4.2.1 Installation Location and Matters Needing Attention
The installation of air conditioner unit must be in accordance with national and local safety codes.
Installation quality will directly affect the normal use of air conditioner unit. The user is prohibited from
installation by himself. Please contact your dealer after buying this machine. Professional installation
workers will provide installation and test services according to installation manual.
Do not connect to power until all installation work is completed.
4.2.2 How to select the installation location for the indoor unit
Where there is no direct sunlight.
Where the top hanger, ceiling and the building structure are strong enough to withstand the weight of the
unit.
Where the drain pipe can be easily connected to outside.
Where the flow of the air inlet and outlet are not blocked.
Where the refrigerant pipe of the indoor unit can be easily led to outside.
Where there is no inflammable, explosive substance or their leakage.
Where there is no corrosive gas, heavy dust, salt mist, smog or moisture.
The unit which is installed in the following places is likely to run abnormally. If unavoidable, please contact
the professional personnel at the GREE appointed service center：
① Where is full of oil;
② Alkaline soil off the sea;
③ Where there is sulfur gas(like sulfur hot spring);
④Where there are devices with high frequency (like wireless devices, electric welding devices, or medical
equipments);
⑤ Special circumstances.