Use and Care Manual

X-Fan Display
REMOTE CONTROLLER OPERATIONS
The wireless remote controller is sleek, versatile and allows you to change room temperatures
and functions on your Sapphire system from the palm of your hand. The large LCD display and
buttons make it easy-to-understand and easy-to-use.
The remote controller is set from factory to display temperatures in °F. If °C is desired, turn
the remote controller OFF with the ON/OFF button and then press “MODE“ and “
––
” buttons
on the remote simultaneously for 5 seconds.
ON/OFF BUTTON
When the system is in OFF mode, the remote controller will
display the time and last room setpoint. When you press the
ON/OFF button, the unit will start in the last operating mode
and room setpoint.
NOTE: If the ON/OFF button is pressed too soon after a
stop, the compressor will not start for 3 to 5 min. due to the
inherent protection against frequent compressor cycling.
LOCK MODE
The Privacy Lock prevents unauthorized access to the unit
controls and prevents tampering with system settings. The
remote controller can be locked by pushing the"+" and "
– "
buttons simultaneously for 5 seconds. The Privacy Lock icon
will be displayed on the remote controller. Repeat the process
to unlock the remote controller.
U
Privacy LockDisplay
OPERATION OF WIRELESS REMOTE CONTROLLER
ON Mode Display
X-FAN MODE
When operating in humid areas, the unit has a DRY COIL function
called X-Fan that will allow the indoor fan to run for a pre-determined
amount of time after the unit is turned off (cooling or dry modes)
to ensure that additional moisture is removed from coil. Push the
“X-FAN” button to enable this feature. The X-FAN icon will
be displayed on remote controller. To deactivate this feature, push
the “X-FAN” button again.
8