Use and Care Manual

OPERATION OF WIRELESS REMOTE CONTROLLER

CLOCK SETTING

Press this button to set clock time. “ ” icon on remote controller

will blink. Within 5 seconds, press “+” or “–” button to set clock

time. With each pressing of “+” or “–” buttons, clock time will

increase or decrease 1 minute. To quickly adjust time setting, press

and hold “+” or “–” button for 2 seconds. Release button when

you have reached the desired time setting. Press “CLOCK” button

to confirm the time, and “ ” icon will stop blinking.

NOTE: Clock time adopts 24-hour mode. A 12-hour format

is not available.

FAN BUTTON

Press the FAN button to adjust the fan circulation indoor speed:

Low ( ), Low-Medium ( ), Medium ( ), Medium-High ( ),

High ( ) and Auto.

I FEEL MODE

Press this button to use the I FEEL function, and the ( ) icon

will be displayed. The unit will sense room temperature at the

remote controller instead of at the indoor unit. It then adjusts

airflow and temperature accordingly for the ultimate in personal

comfort control and energy savings. Press the button again to exit

this function. For the best performance, keep the remote controller

within an area where indoor unit can receive the signal sent by

the remote controller and away from heat or cold temperature

sources while using this function.

I Feel Mode Display

Clock Setting Display

Fan Display