Use and Care Manual

22
the height of the indoor unit. (Fig. 4.33)
Fig. 4.33
(4). Wire the swing louver motor as shown in Fig. 4.34.
Connect them to
the main body
according to the
size of terminals
Fig. 4.34
4.6.2 Installing the Panel
(1). Place the panel at the unit, and latch the hooks beside and opposite the swing ap motor.
(2). Latch other two hooks.
(3). Tighten four hexagonal screws under the latches about 15mm(5/8inch).
(4). Adjust the panel along the direction indicated by the arrow as shown in Fig. 4.35.
(5). Tighten the screws until the thickness of the sealing material between the panel and the
indoor unit reduces to 5~8cm(1/4~3/8inch).
U-match Series Cassette Type Unit
.