Use and Care Manual

4
3 Preparation for Installation
3.1 Standard Parts
The standard parts listed below are furnished and should be used as required.
Table 3.1
Indoor Unit Accessories
No. Name Appearance Q'ty Usage
1 Drain Hose 1
To connect with field supplied drain
pipe
2 Screw with Washer 4
To secure the hook on the cabinet
of the unit.
3 Washer 10
To be used together with the
hanger bolt for installing the unit.
4 Installation templete 1 Used ceiling drilling
5 Gasket Mounting Board 4
To prevent gasket from falling
off
6
Remote Controller
+Batteries
1+2 To control the indoor unit
7 Sealing Plaster 1
8 Cable Clamp 4 To fasten the insulation to pipe
9 Pipe Insulation 1 To insulate the gas pipe
10 Pipe Insulation 1 To insulate the liquid pipe
11 Insulation 4 To insulate the drain pipe
12 Flare Nut 1 To connect gas pipe
13 Flare Nut 1 To connect liquid pipe
14 Service Valve Cap 2
Table 3.2
Outdoor Unit Accessories
No. Name Appearance Q'ty Usage
1 Drain Plug 2 or 3 To plug the unused drain hole.
2 Drainage Connector
or
1
To connect field supplied drain
hose
U-match Series Cassette Type Unit
To protect service port