Service and Parts Manual
Table Of Contents
- Part Ⅰ: Technical Information
- 1. Summary
- 2. Specifications
- 3. Outline Dimension Diagram
- 4. Refrigerant System Diagram
- 5. Electrical Part
- 6. Function and Control
- Part Ⅱ: Installation and Maintenance
- 7. Notes for Installation and Maintenance
- 8. Installation
- 9. Troubleshooting
- 10. Exploded View and Parts List
- 11. Removal Procedure
- Appendix:
103
Installation and Maintenance
Service Manual
Steps
4.Remove grille and panel
grille
panel
Twist off the screws connecting the panel, chassis
and motor support with screwd-river, and then
remove the panel.
Twist off the screws connecting the grille and
panel, and then remove the grille.
5.Remove right side plate and axial flow blade
right side plate
Twist off the screws connecting the right side
plate and chassis, valve support and condenser,
and then remove the right side plate.
axial flow blade
Twist off the nuts on blade with wrench and then
remove the axial flow blade.
Procedure
6.Remove electric box
electric box
Twist off the screws on electric box, cut off the
tieline with scissors or pliers, pull out the wiring
terminal, pull it upwards to remove the electric
box.