Service and Parts Manual
Table Of Contents
- Part Ⅰ: Technical Information
- 1. Summary
- 2. Specifications
- 3. Outline Dimension Diagram
- 4. Refrigerant System Diagram
- 5. Electrical Part
- 6. Function and Control
- Part Ⅱ: Installation and Maintenance
- 7. Notes for Installation and Maintenance
- 8. Installation
- 9. Troubleshooting
- 10. Exploded View and Parts List
- 11. Removal Procedure
- Appendix:
105
Installation and Maintenance
Service Manual
Steps
Twist off the screws connecting accumulator
and gas-liquid separator, and then remove
the accumulator and gas-liquid separator.
11.Remove accumulator and gas-liquid separator
gas-liquid
separator
accumulator
Procedure
Twist off the screws connecting supporting board
sub-assy(accumulator) and then remove the
supporting board sub-assy(accumulator).
12.Remove supporting board sub-assy(accumulator)
supporting board
sub-assy(accumulator)
13.Remove left side plate
left side plate
Twist off the screws connecting the left side plate
and chassis with screwdriver, and then remove
the left side plate.