Manualshelf

Certifications 2

ManualsBrandsGreen Cell ManualsAccus & BatteriesVRLA 12 V 12 Ah AGM (W x H x D) 151 x 95 x 98 mm 6.35 mm blade terminal High number of charge cycles,
123456789
MATERIAL SAFETY DATA SHEET (MSDS)
Lead acid battery
Date of preparation: 09.07.2020
Version: 1.0/ENG
Revision date: -
7
9. Physical and chemical properties
9.1. Information on basic physical and chemical properties
Odour: Not applicable
Appearance: Sealed Valve Regulated lead Acid Battery
State under normal temp: Solid
Flash point (Hydrogen): 259° C
Internal components
pH - (Sulphuric acid): 1.3
Boiling point: Battery Electrolyte 110°C, Lead 1755°C
(at 760 mm/Hg)
Melting point: Lead 327.4 °C
Vapour pressure: 11.7
Vapour density: Battery Electrolyte 3.4 (air=1)
Specific gravity: Battery Electrolyte 1.3 g/cm3 (water=1)
Auto-ignition point: 580°C deg C at 760 mm/Hg
10. Stability and reactivity
VRLA Batteries are considered stable at normal conditions.
Keep away from heat and sources of ignition.
Incompatible with reducing agents. Incompatible with organic agents.
Decomposition products may include hydrogen.
Decomposition products may include sulphur oxides.
11. Toxicological information
Danger of cumulative effects. (R33).
May cause severe irritation.
May cause gastro-intestinal disturbances.
Can cause damage to the mucous membranes.
12. Ecological information
Ecotoxicology - no information available.
13. Disposal considerations
13.1. Waste treatment methods