SDS
_____________________________________________________________________________________________
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
_____________________________________________________________________________________________
Environmental precautions
Environmental precautions
Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or spillage
if safe to do so. Prevent product from entering drains.
Methods and material for containment and cleaning up
Methods for containment
Prevent further leakage or spillage if safe to do so. Do not touch or walk through spilled
material. A vapor suppressing foam may be used to reduce vapors. Dike far ahead of spill
to collect runoff water. Keep out of drains, sewers, ditches and waterways.
Methods for cleaning up
Pick up and transfer to properly labeled containers. Take precautionary measures against
static discharges. Dam up. Soak up with inert absorbent material.
Revision Date 29-May-2015
Green Envy Paint Thinner
7. HANDLING AND STORAGE
Precautions for safe handling
Handling
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with
skin, eyes or clothing. Do not eat, drink or smoke when using this product. Take off
contaminated clothing and wash before reuse. Use personal protection equipment. Avoid
breathing vapors or mists. Keep away from heat/sparks/open flames/hot surfaces. - No
smoking. Use grounding and bonding connection when transferring this material to prevent
static discharge, fire or explosion. Use with local exhaust ventilation. Use spark-proof tools
and explosion-proof equipment. Keep in an area equipped with sprinklers. Use according to
package label instructions.
Conditions for safe storage, including any incompatibilities
Storage
Keep containers tightly closed in a dry, cool and well-ventilated place. Store locked up.
Keep out of the reach of children. Keep away from heat, sparks, flame and other sources of
ignition (i.e., pilot lights, electric motors and static electricity). Keep in properly labeled
containers. Do not store near combustible materials. Keep in an area equipped with
sprinklers. Store in accordance with the particular national regulations. Store in accordance
with local regulations.
Incompatible Products
Strong acids. Strong oxidizing agents. Strong bases.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal precautions
Avoid contact with skin, eyes or clothing. Ensure adequate ventilation. Use personal
protective equipment as required. Evacuate personnel to safe areas. See section 8 for
more information. Keep people away from and upwind of spill/leak. ELIMINATE all ignition
sources (no smoking, flares, sparks or flames in immediate area). Pay attention to
flashback. Take precautionary measures against static discharges. All equipment used
when handling the product must be grounded. Do not touch or walk through spilled
material.
Other Information
Page 5 / 11
Refer to protective measures listed in Sections 7 and 8. Ventilate the area.