SDS

_____________________________________________________________________________________________
Control parameters
Exposure Guidelines
Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH
p-Chloro-a,a,a-trifluorotoluene
98-56-6
TWA: 2.5 mg/m
3
F TWA: 2.5 mg/m
3
F
TWA: 2.5 mg/m
3
dust
(vacated) TWA: 2.5 mg/m
3
Dipropylene glycol monomethyl ether
34590-94-8
STEL: 150 ppm
TWA: 100 ppm
S*
TWA: 100 ppm
TWA: 600 mg/m
3
(vacated) TWA: 100 ppm
(vacated) TWA: 600 mg/m
3
(vacated) STEL: 150 ppm
(vacated) STEL: 900 mg/m
3
(vacated) S*
S*
IDLH: 600 ppm
TWA: 100 ppm
TWA: 600 mg/m
3
STEL: 150 ppm
STEL: 900 mg/m
3
ACGIH TLV: American Conference of Governmental Industrial Hygienists - Threshold Limit Value OSHA PEL: Occupational Safety and Health
Administration - Permissible Exposure Limits Immediately Dangerous to Life or Health
Other Exposure Guidelines
Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d 962
(11th Cir., 1992) See section 15 for national exposure control parameters
Appropriate engineering controls
Engineering Measures
Showers
Eyewash stations
Ventilation systems
Individual protection measures, such as personal protective equipment
Eye/face protection
Tight sealing safety goggles.
Skin and body protection
Wear protective gloves and protective clothing. Long sleeved clothing. Impervious gloves.
Chemical resistant apron. Antistatic boots.
Respiratory protection
No protective equipment is needed under normal use conditions. If exposure limits are
exceeded or irritation is experienced, ventilation and evacuation may be required.
Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with
skin, eyes or clothing. Wear suitable gloves and eye/face protection. Do not eat, drink or
smoke when using this product. Wash hands before breaks and immediately after handling
the product. Contaminated work clothing should not be allowed out of the workplace.
Regular cleaning of equipment, work area and clothing is recommended.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical and Chemical Properties
Physical state
Liquid
_____________________________________________________________________________________________
Green Envy Paint Thinner
None known
Color
Melting / freezing point
No data available
No information available
None known
Revision Date 29-May-2015
Boiling point / boiling range
100 °C / 212 °F
Odor Threshold
None known
No information available
Flash Point
43 C / 109 F
Appearance
None known
Milky white
Property
Values
Odor
Remarks Method
Naphthalenic
Page 6 / 11
pH
UNKNOWN