User's Manual

greenpacket confidential
Quick Installation Guide (Rev. 1.0)
When Outdoor CPE device normally boots-up, refer to User Guide to configure the ODU. After
the ODU successfully connects to Base Station, service personnel can fine tune the azimuth and
elevation of ODU to get optimum RSSI value.
Access the Web Management Page
The web-based configuration utility can be used for initial device installation, parameter
configuration, and function management through the browser.
Ensure that the device is connected to the computer. Follow these steps to log in to the web
management page:
1
Configure the computer's IP address so that the IP addresses of the computer and
the device are in the same network segment.
Note:
The device's default IP address is 10.1.1.254, the subnet mask is 255.255.255.0,
and the login password is admin. If the device operates in routing mode, it is
recommended you automatically obtain the IP address and DNS server address.
2
Open the browser, and enter http://10.1.1.254 in the address box.
3
Enter user / user as the User name and Password to log in to the web management page.
After the login information is verified, the web management page is loaded.
SIM card insertion