User's Manual

18
 Step 3: WiMAX Authen tication Settings. Thi s will config ure WiMAX Auth entication
settings. There are 4 possible options for “Authentication Mode” as No authentication, User
authentication, Device au thentication, and Us er an d device aut hentication. Dep ending o n
which mode user selects, and it will appear different EAP settings for configuration. Except “No
authentication” is selected, user needs to define the EAP supplicant as shown in Figure 9.
Figure 9 WiMAX Authentication Settings in Setup Wizard
Detailed definition of each item in EAP supplicant is listed below.
 EAP Mode: WiMAX out door CPE suppor ts EAP-TLS, EAP-TTL S, EAP-SIM, and
EAP-AKA.
 Anonymous ID: User needs to fill the Outer ID at this field.
 Inner Mode: WiMAX out door CPE supports MS-CHAPv2, MS-CHAP, CHAP, MD5,
and PAP.
 Username: User needs to fill username at this field.
 Password: User needs to fill password at this field.
Once the u ser compl etes all the ste ps, user needs to click the “Save” b utton to save th e
settings, or click “Ba ck” button to return to previous step as shown in Figure 10. It will reload
some services and return to the “Home” window after saving all settings.