User's Manual

23
Name Description
Enable
If the enable box is ch ecked for D HCP server, the DHCP server
will assig n IP addre ss to it s clie nt with the sp ecified IP addre ss
range.
Start IP Starting IP address range
End IP Ending IP address range
Lease Time
The lea se time is a cont rolled time p eriod, allo wing the DHCP
server to reclaim (and then reallocate) IP addresses that are not
renewed (dynamic re -use of IP ad dresses). Le ase tim e i s
measured in minutes in the Configuration Manager.
First DNS Server
Second DNS Server
Third DNS Server
User can sp ecify three DNS serve r and select how the DNS
Server is assigned. There are three options for assigning the DNS
server.
 From ISP
 User Defined
 Non e
If user sel ects “None”, then the DH CP server will no t give clients
the DNS se rver inform ation. If a ll the three DNS servers setting
are set to “Non e”, then the DHCP server will u se the LAN IP
address as the DNS server information for the clients. If the user
chooses “User Defined” and leaves the IP address as “0.0.0.0” it
will change the field to “None”.
Add
Click on the “Add” button to enter a static leased IP address. Enter
the MAC address of the Ethernet device and enter the IP address.
OK Click the “OK” button to exit out of edit mode.
Save
Commit the changes ma de an d save to WiMAX outdoor CPE,
some services will be reloaded.
Cancel Reset fields to the last saved values.
Table 3 Field definition for Network>LAN>DHCP
2.2. WAN
The wide area netwo rk i s anothe r network that user can conn ect to the internet with the