User's Manual

25
Name Description
Operation Mode
Select the WAN operation mode
 Bridge
 Routin g
 NA T
WAN Protocol
Select the WAN encapsulation protocol
 Ethernet
 PPPoE
Get IP Method
Enter the IP method
 From ISP
 Us er
WAN IP Request Timeout
The time the DHCP client waits to re ceive the IP address from
the BS. If it doesn’t get the IP , it will timeout and the CPE will
disconnect the WiMAX conne ction. T he default value is 12 0
seconds. If u ser ente rs 0, it will wait to receive the IP addre ss
infinitely until it’s stopped by the user.
WAN IP Address
If user chooses “User” for IP Method, user should enter the WAN
IP address
WIN IP Subnet Mask
If user chooses “User” for IP Method, user should enter the WAN
IP subnet mask.
Gateway IP Address
If us er chooses “User” for IP Method, use r shou ld enter IP
gateway address
MTU Enter the MTU
Clone MAC Address Enter the clone MAC address to be used by WAN
PPPoE Setting
User Name
The user name to c onnect PPPoE s erver via the selec ted Auth
Protocol
Password The password of the corresponding username
Retype Password Type the “Password” again
Auth Protocol
The a uthentication protocol of t he p eer re quired. S elect which
Authentication protocol to use.
 P AP
 CHAP
 MSCHAPv1
 MSCHAPv2