User's Manual

33
Figure 18 Advanced>NAT>Port Forward
Name Description
Activate Check the box to activate the “Port Forward” rule
Name Name of the Port Forward rule
Protocol
User ne eds to define the desired protocol for rul e. A vailable
options are: TCP, UDP, or TCP/UDP
Incoming Port(s)
User nee ds to define inco ming port ra nge for Port Forwardin g
rule.
Forward Port(s)
User needs to define to which port range will be translated for Port
Forwarding rule. The p acket will be forwarded to one of these
ports if it matches the rule.
Server IP
User ne eds to define whi ch IP address will be translated to if it
matches the Port Forwarding rule. The packet will be forwarded to
this IP address if it matches the rule.
Trash Delete the Port Forward rule
Add Click the “Add” button to create a new Port Forward rule
OK Click the “OK” button to exit table edit mode
Save Commit the changes made and save to the CPE
Cancel Reset field to the last saved values.
Table 8 Field definition for Advanced>NAT>Port Forward