User's Manual

39
Name Description
Add Click the "Add" button to create a new IP Filter rule
OK Click the "OK" button will exit the table edit mode
Active Check the box to activate the IP Filter rule
Source IP Source IP to filter on. It can be in one of the following formats:
IP address (ex. 192.168.0.222)
Subnet (ex. 192.168.1.0/24)
IP range (ex. 192.168.0.150~192.168.0.160)
0.0.0.0/0 means any
Source Port Source Port to filter on. It can be one of the following formats:
Port number (ex. 8080)
Port Range (ex. 1024~2048)
Destination IP Destination IP to filter on. It can be in one of the following formats:
IP address (ex. 192.168.0.222)
Subnet (ex. 192.168.1.0/24)
IP range (ex. 192.168.0.150~192.168.0.160)
0.0.0.0/0 means any
Destination Port Destination port to filter on. It can be one of the following formats:
Port number (ex. 8080)
Port Range (ex. 1024~2048)
Protocol Protocol to filter on
Trash Delete the IP Filter rule
Save Commit the changes made and save to WiMAX outdoor CPE
Cancel Reset fields to the last saved values
Table 10 Field definition for Advanced> Firewall>IP Filter