User's Manual

44
Name Description
General Setup | Enable Clicking the enable check box will activate the RIP routing rule
Redistribute Edit
Click the “Edit” button to activate the st atic ro ute or chan ge the
metric value. The static route refers to the static routes defined in
Advanced>Route>Static Route window
Redistribute | OK Click the “OK” button to exit edit table mode
LAN
Direction
 Non e
 RX
 TX
 RX/TX
Version
If user selects “RX, TX or RX/TX” for Direction, user will get the
following RIP version options available.
 RIP-1
 RIP-2B
 RIP-2M
Authentication
If user select s RIP-2B or RIP-2M for V ersion, user will get the
following Authentication options.
 Non e
 Te xt
 MD5
Authentication ID
If user sele cts “MD5” for Authentication type, user can ente r the
authentication ID and Key
Authentication Key
If user enters “text” for Authentication, user ca n enter a text
authentication key. If user enters “MD5” for Authenti cation type,
user also needs to enter an Authentication ID and Key.
WAN
Direction
 Non e
 RX
 TX
 RX/TX
Version
If user selects “RX, TX or RX/TX” for Direction, user will get the
following RIP version options available.
 RIP-1
 RIP-2B
 RIP-2M