User's Manual

50
Name Description
PPTP Server
Enable  Activate PPTP server.
Server Name  Offer a service name
Auth Protocol
Require the peer to auth enticate itself before allowing netwo rk
packets to be sent or received. We support the following protocol:
 PAP: Password Authentication Protocol
 CHAP: Challenge Handshake Authentication Protocol
 MSCHAP: Microsoft Chall enge Han dshake Authentication
Protocol
 MSCHAPv2: Microsoft Challenge Handshake Authentication
Protocol, Version 2
Encryption
Encryption Scheme:
None
MPPE 40 bits: 40-bit encryption with MPPE
MPPE 128 bits: 128-bit encryption with MPPE
Auto: automatically select
Local IP Address The IP of router
Remote Start IP
As sessions are established, IP addresses are assig ned starting
from “Remote Start IP”
Idle Timeout Disconnect if the link is idle for the assigned seconds
DNS Server 1 The primary DNS (Domain Name Server) addresses to clients
DNS Server 2 The secondary DNS (Domain Name Server) addresses to clients
User Access List
User name User ID to connect PPTP server via the selected Auth Protocol
Server Server protocol type
Password Password to connect PPTP server via the selected Auth Protocol
IP address IP address of the connected client
Connection List
User name The user name of the connection
Remote IP address The peer address of the connection
PPTP IP address The assigned IP address of PPTP
Login Time The time of the connection created
Link Time(s) Timer from the connected time
Save Commit the changes made and save to the CPE
Cancel Reset fields to the last saved values