User's Manual

58
Name Description
L2TP Client
Add Add a new connection setting
Edit Edit the existed connection setting
Edit L2TP Client
Profile Name The name of this connection setting
L2TP Protocol Version
The me ssage of L2TP p rotocol versi on for thi s connection
setting
 2
 3
NAT Mode
Enable or disable NAT when connected to PPTP server
 Y es: enable
 No: disable
Auth Protocol
The Authentication Protocol of the peer required. Select which
Authentication protocol to use.
 P AP
 CHAP
 MSCHAPv1
 MSCHAPv2
Encryption Enc ryption Scheme
Server IP Address The IP address of L2TP server
Username
The usern ame to conne ct L2TP se rver via the select ed Auth
Protocol
Password The password of the corresponding username
Retype Type the “Password” again
Get IP Automatically? Obtain the dynamic IP address, assigned by the L2TP server
Assign IP Address Assign the static IP address for this connection setting
Idle Timeout Disconnect if the link is idle for the assigned seconds
Save Commit the changes made and save to WiMAX outdoor CPE
Cancel Reset fields to the last saved values
Table 19 Field definition for VPN>L2TP>Client>Add