User's Manual

61
Name Description
Add Click the "Add" button to add an IPsec connection rule
Property
Enable Enable IPsec connection.
Connection Name The name of the connection
Connection Type
Select the connection type
 Initiator
 On Demand
 Re sponder
Gateway Information
Local Endpoint Interface The interface of the WiMAX outdoor CPE public-network interface
Local Endpoint IP Address
The IP add ress o r Do main Na me of the WiMAX out door CPE
public-network interface
Remote Endpoint IP
Address
The IP address or Domain Name of the remote peer.
Authentication Method
Pre-Shared Key The pre-share key that two security gateways use to authenticate
Local ID Type
States ho w the WiMAX out door CPE shoul d be identified for
authentication
 IP: The WiMAX out door CPE is identi fied by the assi gned IP fo r
authentication. The default value is 0.0.0.0.
Content The IP address
Remote ID Type
States how the remote peer should be identified for authentication
 IP: The remote pee r is identified by the assign ed IP for
authentication. The default value is 0.0.0.0, and this means WiMAX
outdoor CPE will accept any IP.
Content The IP address
IKE Phase 1