User's Manual

69
Name Description
Setting Type
There are two display types user can select.
 User can choose to display the data by List. If user selects "By
List", user also has the option to add more frequencies.
 "By Range" will display the freq uency by rang e a nd the
incremental value. See Figure "Frequency By Range" for more
detail.
Joint Wide Scan Result
Yes me ans to app end wide sca n resu lt to the freq uency setting .
Only valid when setting type is “By List”.
Default Bandwidth
Select the default bandwidth to be used in Frequency List
 5 MHz
 10 MHz
Valid Band Info
Valid ba nd in formation. If the fre quencies a ren’t located u sing th e
valid band range, the frequency setting will be rejected.
Add The "Add" button will allow user to enter more frequency lists
OK Click the "OK" button to exit table edit mode
Save Commit the changes made and save to WiMAX outdoor CPE
Cancel Reset fields to the last saved values
Table 22 Field definition for WiMAX>Profile>Frequency Settings>By Range
4.1.3. Authentication Settings
Figure 41 WiMAX>ProfiIe>Authenticaton Settings (No Authentication)