Instructions / Assembly

Please let us know if you have any questions about your

raised bed or need help with its assembly. We can be

reached by calling 800.622.5510 Monday –Friday from 9

a.m.–5 p.m. EST

Assembly Guide:

• We recommended that you use a power

screwdriver.

• Set up the raised bed on a level surface.

Setup Steps:

1. Connect 2 sections (as shown) and drive 3 screws

into the predrilled holes. Drive the screw

completely through to the adjoining panel.

2. Connect the 3

section and drive 3 screws into the

predrilled holes through to the adjoining panel.

3. Slide the 4

section into place and drive 6 screws

into the remaining holes to complete the kit.