Instructions / Assembly

Questions? Email [e-mail] or call 800-622-5510 Monday - Friday 8am-5pm EST
ORIGINAL CEDAR RAISED GARDEN BED WITH GRITTERGUARD
ASSEMBLY INSTRUCTIONS
MODEL #
RCTBCG
DIMENSIONS
4ft. wide x 4ft. long
x 10.5in. high
PACKAGE CONTENTS + (4) Screws
x4 x4
11in. x 2.5in. x 2.5in.
Tall Posts
4ft. x 3.5in.
Boards
3.5in. x 3.5in.
Decorative Caps
x12
.
BUILD A WALL
Hold a Board on the ground so it’s standing on edge with the
notched ends to the left and right. Slide a Tall Post down over
one notched end of the Board. Next, slide another Tall Post over
the other notched end. This forms a wall.
Repeat Step One to complete a second wall.
.
BUILD A FRAME
Place the walls parallel to each other and connect them into a square
with two more Boards. This forms the frame of the Garden Bed.
.
ADD A SECOND AND THIRD BOARD TO ALL WALLS &
ATTACH DECORATIVE CAPS
Add two more Boards, one at a time, directly on top of each existing
Board in the frame. Push the Boards down evenly between the tops of
the Tall Posts. If needed, tap snugly into place with a rubber mallet.
Attach each Decorative Cap to a Tall Post with a screwdriver and one
Screw. We recommend drilling a pilot hole first for each Screw.
NEED HELP?
Contact customer service
instead of returing item to store.
800-622-5510 M
–
F 8
–
5
[e-mail]
INSTALL ATION SUPPORT
youtube.com/greenesfence
x4
4ft.
CritterGuards
.
INSTALL CRITTERGUARDS
CritterGuards are pre-assembled and self-staking. Simply push
them down into soft, moist soil inside the walls of each frame.