Instructions / Assembly

.
BUILD TWO WALLS WITH SHORT POSTS.
.
BUILD A FRAME.
Place the walls parallel to each other and connect them into
a square with two more Boards. This forms the Frame of the
center Garden Bed.
Questions? Email [e-mail] or call 800-622-5510 Monday - Friday 8am-5pm EST
ORIGINAL CEDAR RAISED GARDEN BED | ASSEMBLY INSTRUCTIONS
.
CONNECT WALLS FROM STEP 4 TO THE COMPLETED FRAME.
Extend two Boards parallel to each other from the Tall Posts on one
side of the completed Frame, and connect one wall from Step 4 over
the other ends to complete a second Frame. Then repeat with the
other wall to complete the third Frame.
.
BUILD A WALL WITH TALL POSTS.
Hold a Board on the ground so it's standing on edge with the notched
ends to the left and right. Slide a Tall Post down over one notched
end of the Board. Next, slide another Tall Post over the other notched
end. This forms a wall.
Repeat step one to complete a second wall.
PACKAGE CONTENTS + (8) Screws
x8
Decorative
Caps
x24
x4
8in. x 2.5in. x 2.5in.
Short Posts
11in. x 2.5in. x 2.5in.
Tall Posts
x4
4ft. x 3.5 in.
Boards
MODEL #
RCTSB
DIMENSIONS
4ft. wide x 12ft. long
x 7in. - 10.5in. high
Configurations:
.
ADD A SECOND BOARD TO ALL WALLS.
Add Boards, one at a time, directly on top of each existing Board in
the frame. Push the Boards down evenly between the tops of the
Corner Posts. If needed, tap snugly into place with a rubber mallet.
Tall Posts Short Posts
.
ADD A THIRD BOARD BETWEEN THE TALL CORNER POSTS
& ATTACH DECORATIVE CAPS.
When the Garden Bed is completed, attach each Decorative Cap
to a Corner Post with a screwdriver and Screw. We recommend
drilling a pilot hole in each Cap first.
NEED HELP?
Contact customer service
instead of returing item to store.
800-622-5510 M
–
F 8
–
5
[e-mail]
INSTALL ATION SUPPORT
youtube.com/greenesfence
Tall Posts
Short Posts