Instructions / Assembly

Questions? Email [e-mail] or call 800-622-5510 Monday - Friday 8am-5pm EST
ORIGINAL CEDAR COMPOSTER | ASSEMBLY INSTRUCTIONS
MODEL #
RCCOMP
DIMENSIONS
3ft. wide x 3ft. long
x 31in. high
PACKAGE CONTENTS
x4 x48
31in. x 2.5in. x 2.5in.
Corner Posts
3ft. Boards
Spacers
x28
.
BUILD A WALL
Hold a Board on the ground so it’s standing on edge with the
notched ends to the left and right. Slide a Corner Post down
over one notched end of the Board. Next, slide another Corner
Post over the other notched end. This forms a wall.
Repeat Step One to complete a second wall.
.
BUILD A FRAME
Place the walls parallel to each other and connect them into a square
with two more Boards. This forms the frame of the Composter.
.
BUILD THE COMPOSTER WALLS
Slide one Spacer into the top of each Corner Post, and push them
down so they are directly on top of the Boards on all four walls.
Then slide one Board down on top of the Spacers. If needed, tap
snugly into place with a rubber mallet.
Repeat with alternating Spacers and Boards to complete all four
Composter walls.
NEED HELP?
Contact customer service
instead of returing item to store.
800-622-5510 M
–
F 8
–
5
[e-mail]
INSTALL ATION SUPPORT
youtube.com/greenesfence