Instructions / Assembly

Questions? Email [e-mail] or call 800-622-5510 Monday - Friday 8am-5pm EST
VALUE CEDAR RAISED GARDEN BED | ASSEMBLY INSTRUCTIONS
MODEL #
RCECC
DIMENSIONS
4ft. wide x 4ft. long
x 7in. high
PACKAGE CONTENTS + (4) Screws
x4 x4
8in. x 2.5in. x 2.5in.
Short Posts
4ft. x 3.5 in.
Boards
3.5in. x 3.5in.
Decorative Caps
x8
NEED HELP?
Contact customer service
instead of returing item to store.
800-622-5510 M
–
F 8
–
5
[e-mail]
INSTALL ATION SUPPORT
youtube.com/greenesfence
1.
BUILD A WALL
Hold a Board on the ground so it’s standing on edge with the notched
ends to the left and right. Slide a Short Post down over one notched end
of the Board. Next, slide another Short Post over the other notched end.
This forms a wall.
Repeat step one to complete a second wall.
2.
BUILD A FRAME
Place the walls parallel to each other and connect them into
a square with two more Boards. This forms the frame of the
Garden Bed.
3.
FINISH GARDEN BED & ATTACH DECORATIVE CAPS
Add one more Board, one at a time, directly on top of each
existing Board in the frame. Push the Boards down evenly
between the tops of the Short Posts. If needed, tap snugly into
place with a rubber mallet. When the Garden Bed is completed,
attach each Decorative Cap to a Short Post with a screwdriver and
Screw. We recommend drilling a pilot hole in each Cap first.
TO STACK GARDEN BEDS FOR MORE HEIGHT:
• Assemble the first Garden Bed without Decorative Caps, or remove Caps
from a completed Bed.
• The Corner Posts are designed to be taller than the Boards, so Beds can
be stacked securely.
• Slide a Board from the second Garden Bed into tops of the Corner Posts from
the first Bed, to extend one wall upwards.
• Slide Corner Posts from the second Bed down on both ends of the Board to lock inplace.
• Continue assembling the second Bed, sliding Boards and Posts into place on top
of the first to complete another 4ft. x 4ft. square.
• Attach Decorative Caps to the tops of each Corner Post.